MTSH-33 Pressure Filter Device – How to Use Pressure Filtration Application Scope The MTSH-33 pressure filter device is widely used in various industries such as pharmaceuticals, biotechnology, mining, beverages, brewing, watchmaking, and scientific research laboratories. It effectively filters bacteria and particles from water, medical oils, lubricants, fuel, and other liquids. The device can remove particles with a diameter of 0.65 microns and achieve sterilization for particles smaller than 0.45 microns. This system utilizes positive pressure filtration, which is faster and more efficient than traditional negative pressure methods. Pressure Filtration Instructions Insert the specialized funnel into the outer pressure tank and secure the top cover. Place the filter flat in a cleaning container and soak it in distilled water at 70°C until fully wet. Let it sit for a few hours (at least 4 hours) and then repeat the process overnight. Finally, rinse the filter with warm distilled water before use. Once cleaned and wet, place the filter membrane into the sintered glass funnel and position it properly to prevent leakage. Pour the liquid into the inlet, allow the funnel to release air, and once all bubbles are gone, tighten the inlet. Then proceed with the filtration process. Precautions The water film is suitable for liquids with a pH range of 2 to 9. Avoid using it with strong acids, strong bases, or organic solvents like alcohol. The product is generally resistant to temperatures up to 130°C and can withstand a pressure of 3–4 kg per square centimeter. 15W Fast Wireless Charger,15W Fast Charger,Fast Charger For Car,Wireless Charger With Type-C Comcn Electronics Limited , https://www.comencnspeaker.com