The characteristics, classification and development direction of servo system

A servomotor (servomotor) is an engine that controls the operation of a mechanical component in a servo system, and is an auxiliary motor indirect transmission. The servo motor can control the speed and position accuracy very accurately, and can convert the voltage signal into torque and speed to drive the control object. The servo motor rotor speed is controlled by the input signal and can react quickly. It is used as an actuator in the automatic control system, and has the characteristics of small electromechanical time constant, high linearity, and starting voltage, which can receive the received electrical signal. Converted to an angular displacement or angular velocity output on the motor shaft. Divided into two major categories of DC and AC servo motor, its main feature is that when the signal voltage is zero, there is no rotation phenomenon, and the rotation speed decreases uniformly with the increase of torque.

The function of the CNC machine tool servo system is to accept the command signal from the numerical control device, drive the moving parts of the machine tool to follow the command pulse motion, and ensure the fast and accurate action, which requires high quality speed and position servo. The above refers mainly to the feed servo control, in addition to the servo control of the main motion, but the control requirements are not as high as the former. Technical indicators such as precision and speed of CNC machine tools often depend mainly on the servo system.

The characteristics, classification and development direction of servo system

First, the basic requirements and characteristics of the servo system

1. Basic requirements for the servo system

(1) Good stability: Stability means that the system can reach new or return to the original equilibrium state after a short adjustment process under the given input or external disturbance.

(2) High precision: The accuracy of the servo system refers to the accuracy with which the output can follow the input. As a precision machined CNC machine tool, the required positioning accuracy or contour machining accuracy is usually high, and the allowable deviation is generally between 0.01 and 0.001 mm.

(3) Good responsiveness: Fast response is one of the signs of the dynamic quality of the servo system, that is, the response of the tracking command signal is required to be fast, and the transition process time is required to be short, generally within 200ms or even less than tens of milliseconds; On the other hand, in order to meet the overshoot requirement, the leading edge of the transition process is required to be steep, that is, the rate of increase is large.

2, the main features of the servo system

(1) Accurate detection device: closed-loop control with composition speed and position.

(2) There are a variety of feedback comparison principles and methods: according to the principle of information feedback by the detection device, the servo system feedback comparison method is also different. At present, there are three kinds of pulse comparison, phase comparison and amplitude comparison.

(3) High-performance servo motor (referred to as servo motor): CNC machine tools for efficient and complex profile machining. The servo system will often be in frequent starting and braking processes. It is required that the ratio of the output torque of the motor to the moment of inertia is large to generate a sufficiently large acceleration or braking torque. The servo motor is required to have a large enough output torque at low speed and run smoothly to minimize the intermediate link in the connection with the mechanical moving part.

(4) Speed ​​regulation system with wide speed regulation range, ie speed servo system: From the control structure of the system, the position closed loop system of CNC machine tool can be regarded as double closed loop automatic control with position adjustment to outer ring and speed adjustment to inner ring. The actual working process of the system is to convert the position control input into the corresponding speed reference signal, and then drive the servo motor through the speed control system to realize the actual displacement. The main motion of CNC machine tools requires high speed regulation performance, so the servo system is required to be a high-performance wide speed control system.

Second, the classification of the servo system

The servo system is divided according to its driving components, and there are a step servo system, a DC motor (referred to as a DC motor) servo system, and an AC motor (referred to as an AC motor) servo system. According to the control method, there are open-loop servo system, closed-loop servo system and semi-closed-loop servo system. In fact, the numerical control system is also divided into three types: open loop, closed loop and semi-closed loop, which are related to the three methods of servo system.

1, open loop system

Open-loop system, which consists mainly of drive circuit, actuator and machine tool. A commonly used actuator is a stepper motor. The open loop system, which is usually referred to as a stepper motor as an actuator, is a stepper servo system. In this system, if it is a high power drive, a stepper motor is used as the actuator. The main task of the drive circuit is to convert the command pulse into the signal required to drive the actuator.

2, closed loop system

The closed-loop system is mainly composed of an actuator, a detection unit, a comparison link, a drive circuit and a machine tool. Its block diagram is shown in Figure 2. In the closed loop system, the detecting component detects the actual position of the moving part of the machine tool and converts it into an electrical signal for feedback to the comparison link. Common detection components include resolvers, inductosyn, gratings, magnetic grids, and encoder discs. A servo system consisting of a detecting element mounted on a lead screw is generally referred to as a semi-closed loop system; a servo system composed of detecting elements mounted on a workbench is referred to as a closed loop system. Due to the transmission error between the lead screw and the table, the accuracy of the semi-closed loop servo system is lower than that of the closed loop servo system.

The function of the comparison link is to compare the command signal with the feedback signal. The difference between the two is used as the following error of the servo system. After the drive circuit, the control actuator drives the table to continue moving until the following error is zero. According to the form of the signal entering the comparison link and the feedback detection mode, the closed-loop (semi-closed loop) system can be divided into three types: pulse comparison servo system, phase comparison servo system and amplitude comparison servo system.

Since the signal output from the comparison link is weak, it is not enough to drive the actuator, so it needs to be amplified, and the drive circuit is set for this purpose.

The function of the actuator is to convert the electrical signal representing the displacement into a mechanical displacement based on the control signal, ie the following error signal from the comparison. Commonly used actuators include DC wide speed motor and AC motor. The actuator is an integral part of the servo system, and the driver circuit varies from actuator to actuator.

Recently, our school has developed a high-performance AC servo (CNC machine) control system. The system has stable performance and reliable quality. It can be widely used in industrial production applications such as digital engraving, packaging machinery and mold production. It is more suitable for mechanical and electrical integration in colleges and universities, electronic and electrical, electrical automation students (graduate) production internship, curriculum design. Experimental research such as courses.

Third, the development direction of the servo system

With the continuous development of productivity, the servo system is required to develop in the direction of high precision, high speed and high power.

(1) Make full use of the rapidly developing electronic and computer technology, adopt digital servo system, use microcomputer to realize adjustment control, enhance software control function, eliminate the influence of nonlinear error and adjustment error of analog circuit and temperature drift, etc. Greatly improve the performance of the servo system and create conditions for optimal control and adaptive control.

(2) Develop high-precision, fast detection components.

(3) Develop high-performance servo motors (actuators). At present, the transmission ratio of the AC servo motor has reached 1:10000, and the use is increasing. Brushless motors have two times higher acceleration performance than DC servo motors due to the absence of brushes and commutator segments. They are also convenient for maintenance and are often used in high-speed CNC machine tools.

------------------------------

Summary of machine vision technology data - let machine vision product design and practice eye-catching!

Let the machine vision product design and practice the eye-catching!

Drum type Rice Cooker

 

Features

This type rice cooker is famous with drum type appearance, which is easy operation and easy clean.

There are two type of inner pot ,  one type called white pot which is without non-stick but cheaper price .another one called non-stick pot is polished with emery, Also there are two type non-stick with different price ,it`s depending on different demands to use.

 

And the inner pot cannot be burned on the stove, which will make the pot transfigured and bad contact with the heating plate. While cooking , the heating plate or the fuse is most likely to be burned for the bad contact of the inner pot and the heating plate, Besides, make sure to dry the pot before putting into the outer shell of the rice cooker ,or else the drops of water flowing on the heating plate, will make the heating plate rusted.

 

Applications

Many peoples are used drum type rice cooker for congee and soup, some of peoples are prefer to use this type rice cooker for steaming.

Drum Rice Cooker

Drum Rice Cooker,Drum Shape Rice Cooker,Electric Drum Rice Cooker,Multifunctional Drum Rice Cooker

Guangzhou Taipeng Electrical Appliances Technology CO., LTD. , https://www.kettles.pl

Posted on