Model NO.: WSP-PLM-12/40
Modulation System: PWM
In-Out: Lifting Pressure Type
Power Supply Voltage: 1.5-36V
Pack Sealing Size: SC-70
Brand: OEM
Constant Current: Constant Current Design (Constant Current Mode
Trademark: OEM
Specification: CE, CB
Origin: Shenzhen, Guangdong, China
HS Code: 850440140
Model NO.: WSP-PLM-12/40
Modulation System: PWM
In-Out: Lifting Pressure Type
Power Supply Voltage: 1.5-36V
Pack Sealing Size: SC-70
Brand: OEM
Constant Current: Constant Current Design (Constant Current Mode
Trademark: OEM
Specification: CE, CB
Origin: Shenzhen, Guangdong, China
HS Code: 850440140
PLM Series: 12-40WÂ constant current power supply with PFC functionFeatures:
* 110~295VAC input
*Built-in active power factor correction function
*Protection function: Short circuit, over temperature(PLM-40)
*Fully sealed insulation plastic shell
*Constant current design (constant current mode)
*No-load loss < 0.5W
*Three-phase analog dimming function (PLM-40)
*Natural cooling
*Class 2 or 1 isolation, no F.G
*IP30 Design
*Class 2 or 1Â power supply, by LPS(limited power source) test
*Low cost, high reliability
*Suitable for indoor LED lighting application
*2 years warranty
Series No. | Model No. | Specification | |||||||||||||
AC input range | AC inrush Current(Max.) | Start time | Short cirduit protection | PLM-40 over temperature protection | Withstand Voltage | Working Temperature | EMC standards | Connector input/output |
Output | Voltage tolerance | Ripple&noise | Efficiency | Size(mm) | ||
PLM-12 | PLM-12-350 | 110~295VAC;156~417VDC | Cold start, 15A/230VAC |
500ms (230VAC full load) | hiccup mode,auto-recovery | / | I/P-O/P:3.75KVAC | -30ºC~+50ºC | EN55015,EN61000-3-2 class C,EN61000-3-3,EN61000-4-2,3,4,5,6,8,11, EN61547 | 2+2P,Layering type terminal type | 22~36V,350mA | ±5% | 3.6V | 85.0% | 145x38x22 |
PLM-12-500 | 15~24V,500mA | ±5% | 2.4V | 84.0% | |||||||||||
PLM-12-700 | 11~18V,700mA | ±5% | 2.4V | 83.0% | |||||||||||
PLM-12-1050 | ±5% | 1.8V | 81.0% | ||||||||||||
PLM-25 | PLM-25-350 | 110~295VAC;156~417VDC | Cold start, 15A/230VAC |
500ms (230VAC full load) | hiccup mode,auto-recovery | / | I/P-O/P:3.75KVAC | -30ºC~+45ºC | 42~72V,350mA | ±5% | 7.2V | 87.0% | 145x38x22 | ||
PLM-25-500 | 30~50V, 500mA | ±5% | 5.0V | 86.0% | |||||||||||
PLM-25-700 | 21~36V,700mA | ±5% | 3.6V | 86.0% | |||||||||||
PLM-25-1050 | 14~24V,1050mA | ±5% | 2.4V | 85.0% | |||||||||||
PLM-40 | PLM-40-350 | 110~295VAC;156~417VDC | Cold start, 15A/230VAC |
500ms (230VAC full load) | hiccup mode,auto-recovery | hiccup mode,auto-recovery | I/P-O/P:3.75KVAC | -30ºC~+45ºC | 53~105V,350mA | ±5% | 10V | 88.0% | 175x42x24 | ||
PLM-40-500 | 40~80V, 500mA | ±5% | 8.0V | 88.0% | |||||||||||
PLM-40-700 | 29~57V,700mA | ±5% | 6.0V | 87.0% | |||||||||||
PLM-40-1050 | 19~38V,1050mA | ±5% | 4.0V | 87.0% | |||||||||||
PLM-40-1400 | 15~29V,1400mA | ±5% | 3.0V | 86.0% | |||||||||||
PLM-40-1750 | 12~23V,1750mA | ±5% | 2.5V | 86.0% |
Features:
* 110~295VAC input
*Built-in active power factor correction function
*Protection function: Short circuit, over temperature(PLM-40)
*Fully sealed insulation plastic shell
*Constant current design (constant current mode)
*No-load loss < 0.5W
*Three-phase analog dimming function (PLM-40)
*Natural cooling
*Class 2 or 1 isolation, no F.G
*IP30 Design
*Class 2 or 1Â power supply, by LPS(limited power source) test
*Low cost, high reliability
*Suitable for indoor LED lighting application
*2 years warranty
Series No. | Model No. | Specification | |||||||||||||
AC input range | AC inrush Current(Max.) | Start time | Short cirduit protection | PLM-40 over temperature protection | Withstand Voltage | Working Temperature | EMC standards | Connector input/output |
Output | Voltage tolerance | Ripple&noise | Efficiency | Size(mm) | ||
PLM-12 | PLM-12-350 | 110~295VAC;156~417VDC | Cold start, 15A/230VAC |
500ms (230VAC full load) | hiccup mode,auto-recovery | / | I/P-O/P:3.75KVAC | -30ºC~+50ºC | EN55015,EN61000-3-2 class C,EN61000-3-3,EN61000-4-2,3,4,5,6,8,11, EN61547 | 2+2P,Layering type terminal type | 22~36V,350mA | ±5% | 3.6V | 85.0% | 145x38x22 |
PLM-12-500 | 15~24V,500mA | ±5% | 2.4V | 84.0% | |||||||||||
PLM-12-700 | 11~18V,700mA | ±5% | 2.4V | 83.0% | |||||||||||
PLM-12-1050 | ±5% | 1.8V | 81.0% | ||||||||||||
PLM-25 | PLM-25-350 | 110~295VAC;156~417VDC | Cold start, 15A/230VAC |
500ms (230VAC full load) | hiccup mode,auto-recovery | / | I/P-O/P:3.75KVAC | -30ºC~+45ºC | 42~72V,350mA | ±5% | 7.2V | 87.0% | 145x38x22 | ||
PLM-25-500 | 30~50V, 500mA | ±5% | 5.0V | 86.0% | |||||||||||
PLM-25-700 | 21~36V,700mA | ±5% | 3.6V | 86.0% | |||||||||||
PLM-25-1050 | 14~24V,1050mA | ±5% | 2.4V | 85.0% | |||||||||||
PLM-40 | PLM-40-350 | 110~295VAC;156~417VDC | Cold start, 15A/230VAC |
500ms (230VAC full load) | hiccup mode,auto-recovery | hiccup mode,auto-recovery | I/P-O/P:3.75KVAC | -30ºC~+45ºC | 53~105V,350mA | ±5% | 10V | 88.0% | 175x42x24 | ||
PLM-40-500 | 40~80V, 500mA | ±5% | 8.0V | 88.0% | |||||||||||
PLM-40-700 | 29~57V,700mA | ±5% | 6.0V | 87.0% | |||||||||||
PLM-40-1050 | 19~38V,1050mA | ±5% | 4.0V | 87.0% | |||||||||||
PLM-40-1400 | 15~29V,1400mA | ±5% | 3.0V | 86.0% | |||||||||||
PLM-40-1750 | 12~23V,1750mA | ±5% | 2.5V | 86.0% |
LED Dimmable Bulb,LED Dimmable BR20 Bulb,Living Room Light
LED Linear Light LED Spotlights Co., Ltd. , http://www.chledlamps.com