Tender number name Qualification, performance CWEME-DTDY20161202 Closed water heat exchanger, closed heat water waste heat utilization heat exchanger Registered capital: 20 million yuan and above. Closed water waste heat utilization heat exchanger Supply performance: With sales, design, manufacture 4 sets of 600MW and above capacity unit supporting plate and shell heat exchanger performance. Closed water waste heat utilization heat exchanger performance: In the past 5 years, the bidder has two sets of 600MW and above capacity unit supporting shell and plate heat exchanger for more than 2 years of good operation experience, no major equipment was found during installation and commissioning operations. Quality problems or there are effective improvements. 4 Bidder qualification requirements: Tender number The name of the target Proposal invoice invoice ( Bid deposit amount ( CWEME-DTDY20161202 Closed water heat exchanger, closed heat water waste heat utilization heat exchanger 1521 150021 No. Article number project content 9 3.4 Bid bond 3. In order to increase the efficiency of bid bond retiring and refunding, the margin retiring method is changed to the operation mode of the collective mining platform, and each remittance account number is not the same. If the return margin is non-originating, the supplier will be required to submit various information returned by the non-original route to the project manager, such as bank account, name, bank, etc., if there are other circumstances such as non-original return conditions, such as the company's main body. In case of changes, etc., it is necessary to submit the relevant company change certification materials to the project manager. After the approval is passed, it may be returned on a non-original basis. 4. The bid bond must be wired in the bidder’s basic account (it is not allowed to wire in the name of an individual or other company). If the bidder participates in multiple bids, separate telegraphic transfers will be made according to the target (it is not allowed to synthesize multiple bids). If the security deposit cannot be returned normally or postponed due to this article, we will not bear the related responsibility. 5. The bid bond of the unsuccessful bidder will be returned within 5 days after the signing of the contract; the winning bidder's bid security will be deducted after the written contract is deducted from the bid agent service fee. 6 Contact: Zhang Jie Mobile: phone fax E-mail: In order to ensure that you can bid smoothly, please consult the bidding agency or the tenderer for detailed requirements for bidding before bidding or purchasing the bidding documents. The specific requirements and project conditions shall be interpreted by the bidding agency or the tenderee. Spherical concave mirrors with metallic(UV-Enhanced Aluminum, Protected Aluminum, or Protected Silver Coating) or dielectric coatings are used in light collection applications or as focusing mirrors in imaging systems. Spherical Plano concave mirror is holt sale very much,as well as cylindrical plano concave mirror. Welcome inquiry to Zoolied team. Concave Mirrors,Plano Concave Mirrors,Spherical Mirrors,755Nm Laser Convave Mirrors Zoolied Inc. , https://www.zoolied.com
Bulletin category: Domestic tender
Tenderer: China Water Resources and Electric Material Group Co., Ltd. Source of funding: Others (Part I of the Bidding) In November 2016, the 4th batch of auxiliary tenders for Datang Dongying 2×1000MW new construction project was announced. Tender Number: CWEME-DTDY20161202
Industry: Power Industry Labelling Category: Domestic Tendering Information Source of Funding: Capital and Project Financing Tenderee: China Water Resources and Electric Material Group Co., Ltd. End User: Datang Dongying Power Generation Co., Ltd.
Region: Dongying City, Shandong Province, tender content:
Pursuant to the Law of the People’s Republic of China on Tendering and Bidding and related laws and regulations, the principle of openness, fairness, impartiality, and good faith was entrusted by Datang Dongying Power Generation Co., Ltd. to commission the first batch of auxiliary equipment for the project (see the tender for details). Scope and Qualification Requirements) Domestic open tendering is conducted. Qualified entities are welcome to attend the tender.
1 Project Overview:
Datang Dongying 2×1000MW new construction project is located in the Dongying Port Economic Development Zone in the northern part of Dongying City, within the breakwater of Gangcheng City, and borders on the Bohai Sea to the east and the north. It is about 110 kilometers away from Dongying City. It is the “Planning Blue Economic Zone Development Plan of Shandong Province†and "The development plan of the Yellow River Delta efficient eco-economic zone" key power projects. A 4×1000MW ultra-supercritical coal-fired turbo-generator unit was planned at one time, which was constructed in phases and conditions for further expansion were maintained. The first phase construction of 2 × 1000MW ultra-supercritical coal-fired generating units. The main engine adopts secondary intermediate reheating and six-cylinder six-bar steam condensing steam turbines to simultaneously establish flue gas desulfurization, denitrification, and dust removal devices. The unit cooling adopts the seawater direct current circulation method, the industrial water adopts the seawater desalination process, the desulfurization adopts the limestone-gypsum wet desulfurization process, and the desulfurization efficiency is not less than 98.7%; the denitration adopts the low nitrogen combustion technology and the selective catalytic reduction (SCR) process. The liquid ammonia is a denitrifying reducing agent and the denitrification efficiency is not less than 85%. The dust collector adopts a low-temperature electrostatic precipitator and a wet electrostatic precipitator. The comprehensive dust removal efficiency is not less than 99.93%, and the pollutant emission index meets the gas turbine emission standard.
2 Construction site: Dongying Port Economic Development Zone, Dongying City, Shandong Province
3 Bidding scope and qualification requirements:
Certification certificate: The bidding enterprise has passed the ISO9000 quality management system certification, and its certificate is within the validity period.
Production license: Yes.
Closed water heat exchanger Delivery performance: The sales, design, and manufacture of 8 sets of seawater pipe heat exchangers with the same or higher capacity units.
Closed water heat exchanger performance: In the past 5 years, the bidder has 4 sets of seawater pipe heat exchanger equipment of the same or higher capacity units with more than 2 years of good operating experience. No major equipment quality was found during installation and commissioning operations. The problem or there are effective improvements.
4.1 Must have an independent legal personality of the People's Republic of China and have a legal and valid business license. Non-PRC registered bidders should be registered with the Administration for Industry and Commerce.
4.2 The person in charge of the unit is the same person or a different unit that has a controlling or managing relationship and may not participate in the bid for the same tender item or for the same tender item that is not divided into bid segments.
4.3 Imported Equipment (Materials) The bidder shall provide the manufacturer or manufacturer of the bidding equipment the only authorized agent for this project.
4.4 Qualification requirements: Qualifications and capabilities for designing, manufacturing, or complete sets of equipment for this tender are detailed in the scope and qualifications of the tender.
4.5 Performance requirements: With the same type of product in the country a good operating performance, see the tender scope and qualification requirements.
4.6 With good bank credit and business reputation, it is not being ordered to suspend business, property is taken over, frozen, or bankrupted. Bank credit.
4.7 The bidder has not breached the contract or been executed in any contract in the past 3 years, or any contract was cancelled due to the bidder's reason.
4.8 The bidder has not been involved in economic lawsuits due to violations of laws and regulations within the past three years.
4.9 In the last three years, there has been no fraudulent bid or serious breach of contract.
4.10 There have been no cases of borrowing others or lending qualifications or performance to others.
4.11 The Commonwealth does not accept bids in this tender.
5 Acquisition of tender documents
5.1 Method of Obtaining: All bidders who are interested in participating in this bidding, (.)
5.2 Release date: November 15, 2016 to November 25, 2016.
(It takes about 5 days to process the CA certificate electronic key, including material preparation, mail processing, and CA certificate electronic key return time. Please properly consider the arrangement processing time. The overdue system will not be able to download the bidding documents, and the bidding fee will not be refunded at your own risk. )
5.3 This qualification review uses the postqualification method. (After bid opening, the qualification of each bidder shall be reviewed, and the manufacturer who fails to meet the qualification requirements for the tender announcement shall terminate its bid.)
5.4 The bidding fee and security deposit for this tender are
6.1 Deadline for Submitting Bidding Documents (Bid Deadline, the same below): December 10, 2016, 10:00. Tentatively, if there is any change, the bid opening notice shall prevail. )
6.3 Delivery method: The bidding documents shall be sealed as required and delivered to the designated place. If the goods are delivered late or not delivered to the designated place or are not sealed as required, the tenderee will not accept it.
The tender number bidding code: CBL_20161116_188906885